Caterpillar OFF-HIGHWAY TRUCK 775E - catalog of spare parts

Specifications

Engine

The number of cylinders - 12

Engine make - 2236

Engine Model - 3412E

Gross Power - 760 HP

Net power - 730 hp

The measured power @ - 2000 rpm

Displacement - 1649cu in

Maximum Torque - 2542.4 lbs. Ft.

Torque boost - 33%

Hole Diameter - 5.4 inches

Net Power - Cat - 730 HP

Net Power - ISO 9249 - 730 HP

Net Power - SAE J1349 - 730 HP

Net power - 80/1269 / EEC - 730 hp

Gross Power - SAE J1995 - 760 HP

Engine Model - Cat 3412E

Flywheel power - 730 hp

Nominal engine speed - 2000 rpm

Operational

Fuel tank capacity - 85gal

Cooling system capacity - 40gal

Engine oil capacity - 18 gal

Fluid Diff and Final Drive - 41 gal

Steering system capacity - 16 gal

The volume of the brake system is 81 gal

Hydraulic Volume - 35 Gallons

Tire size - 24.00-R35 (E4)

Transmission

Number of gears - Forward - 7

Number of gears - reverse - 1

Top Speed ​​- 40.9 mph

Reverse - 7.5 mph

Forward - 1 - 6.2 mph

Forward - 2 - 8.6 mph

Forward - 3 - 11.6 mph

Forward - 4 - 15.6 mph

Forward - 5 - 21.1 mph

Forward - 6 - 28.5 mph

Ahead - 7 - 41.1 mph

Steering

Steering Standards - Conforms to SAE J1511 FEB94 and ISO 5010: 1992

Angle of rotation - 31degrees

Turntable - clearance diameter - 78.9 feet in

Weights

Empty Weight - 67,000 pounds

Loaded weight - 239,000 pounds

Weight Distribution Front - Empty - 44.3%

Rear weight distribution - empty - 55.7%

Weight Distribution Front - Loaded - 31.2%

Weight distribution at the back - loaded - 68.8%

Tires

Standard bus - standard: 24.00-R35 (E4)

Dump

Nominal Payload - 136488.2 lbs

Payload - Stroke - 41.1yd3

Payload - Fancy - 54.3yd3

Dump angle - 60 degrees

The brakes

Brake surface - front - 216in2

Brake Surface - Rear - 9496in2

Brake Standards - ISO 3450: 1996

Dimensions

Total length - 30.21 feet in

Full Width - 14.63 feet in

Total height - 14.47 feet in

Wheelbase - 13.75 feet in

Ground clearance - 2.23 feet in

Blade Height - 28.86 Feet in

Dump clearance - 2.24 feet in

Body Lifts

Pump flow rate - high idle - 148 gal / min

Relief Valve Installation - Lift - 2750 psi

Body Lift Time - High Idle - 9.5 s

Body Lowering Time - Float - 12.5 s

Relief Valve Installation - Bottom - 500 psi

Latest discs

Planetary ratio - 4.80: 1

Differential coefficient - 3.64: 1

The overall reduction ratio is 17.48: 1

Operational characteristics

Nominal Payload Class (100%) - 140,000 pounds

Top Speed ​​- Loaded - 41.1 mph

Body capacity - Impact - 41.1id3

Maximum capacity - 140,000 pounds

Rotation angle - 31 degrees

Body volume - SAE 2: 1 - 54.3yd3

Service replenishment options

Cooling system - 40gal

Differential - Final drives - 41gal

Steering tank - 9gal

Steering system - including tank - 16gal

Fuel tank - 185gal

Torque converter - transmission system - including crankcase - 19 gal

Torque converter - Brake - Hydraulic winch tank - 35gal

Lift brake system - includes a tank - 81 gal

Weight distribution - approximate

The front axle is empty - 44.3%

Front axle - loaded - 31.2%

The rear axle is empty - 55.7%

Rear axle - loaded - 68.8%

Capacity - double slope - 100% duty cycle

Blow - 42.8yd3

Heap 2: 1 (SAE) - 53.9d3

Capacity - flat floor - 100% duty cycle

Amazed - 41.1id3

Heap 2: 1 (SAE) - 54.3d3

ROPS

ROPS / FOPS Standards - Meets SAE J1040 MAY94 and ISO 3471: 1994

Sound

Sound Standards - Conforms to SAE J88 APR95

Suspension

Rear Axle - Fluctuations - 8 degrees

Effective Cylinder Stroke - Front - 8.2 inches

Effective Cylinder Stroke - Rear - 5.9in

Approximate Weights - Two-ply body - 21,400 pounds

Approximate Weights - Flat Floor - 28,814 lbs.